MDL-49650 Templates: Move templates out of invalid sub directory.
[moodle.git] / config-dist.php
CommitLineData
a084ac0d 1<?php
6077020a 2///////////////////////////////////////////////////////////////////////////
3// //
4// Moodle configuration file //
5// //
6// This file should be renamed "config.php" in the top-level directory //
7// //
8///////////////////////////////////////////////////////////////////////////
9// //
10// NOTICE OF COPYRIGHT //
11// //
12// Moodle - Modular Object-Oriented Dynamic Learning Environment //
c6b456f6 13// http://moodle.org //
6077020a 14// //
3b365361 15// Copyright (C) 1999 onwards Martin Dougiamas http://moodle.com //
6077020a 16// //
17// This program is free software; you can redistribute it and/or modify //
18// it under the terms of the GNU General Public License as published by //
554a3c4c 19// the Free Software Foundation; either version 3 of the License, or //
6077020a 20// (at your option) any later version. //
21// //
22// This program is distributed in the hope that it will be useful, //
23// but WITHOUT ANY WARRANTY; without even the implied warranty of //
24// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the //
25// GNU General Public License for more details: //
26// //
27// http://www.gnu.org/copyleft/gpl.html //
28// //
29///////////////////////////////////////////////////////////////////////////
30unset($CFG); // Ignore this line
b30fa335 31global $CFG; // This is necessary here for PHPUnit execution
c57e9015 32$CFG = new stdClass();
6077020a 33
34//=========================================================================
35// 1. DATABASE SETUP
36//=========================================================================
37// First, you need to configure the database where all Moodle data //
38// will be stored. This database must already have been created //
39// and a username/password created to access it. //
6077020a 40
17601a7e 41$CFG->dbtype = 'pgsql'; // 'pgsql', 'mariadb', 'mysqli', 'mssql', 'sqlsrv' or 'oci'
d0bf00e0
DM
42$CFG->dblibrary = 'native'; // 'native' only at the moment
43$CFG->dbhost = 'localhost'; // eg 'localhost' or 'db.isp.com' or IP
44$CFG->dbname = 'moodle'; // database name, eg moodle
45$CFG->dbuser = 'username'; // your database username
46$CFG->dbpass = 'password'; // your database password
47$CFG->prefix = 'mdl_'; // prefix to use for all table names
48$CFG->dboptions = array(
49 'dbpersist' => false, // should persistent database connections be
50 // used? set to 'false' for the most stable
51 // setting, 'true' can improve performance
52 // sometimes
3c1293fe
PS
53 'dbsocket' => false, // should connection via UNIX socket be used?
54 // if you set it to 'true' or custom path
55 // here set dbhost to 'localhost',
56 // (please note mysql is always using socket
57 // if dbhost is 'localhost' - if you need
58 // local port connection use '127.0.0.1')
d0bf00e0
DM
59 'dbport' => '', // the TCP port number to use when connecting
60 // to the server. keep empty string for the
61 // default port
62);
1e55ed26 63
6077020a 64
9d975de4 65//=========================================================================
ec2d8ceb 66// 2. WEB SITE LOCATION
6077020a 67//=========================================================================
68// Now you need to tell Moodle where it is located. Specify the full
eb2042f6 69// web address to where moodle has been installed. If your web site
70// is accessible via multiple URLs then choose the most natural one
6077020a 71// that your students would use. Do not include a trailing slash
11e7b506 72//
73// If you need both intranet and Internet access please read
74// http://docs.moodle.org/en/masquerading
6077020a 75
76$CFG->wwwroot = 'http://example.com/moodle';
77
78
6077020a 79//=========================================================================
ec2d8ceb 80// 3. DATA FILES LOCATION
6077020a 81//=========================================================================
82// Now you need a place where Moodle can save uploaded files. This
eb2042f6 83// directory should be readable AND WRITEABLE by the web server user
84// (usually 'nobody' or 'apache'), but it should not be accessible
6077020a 85// directly via the web.
86//
87// - On hosting systems you might need to make sure that your "group" has
88// no permissions at all, but that "others" have full permissions.
89//
90// - On Windows systems you might specify something like 'c:\moodledata'
91
92$CFG->dataroot = '/home/example/moodledata';
93
94
95//=========================================================================
ec2d8ceb 96// 4. DATA FILES PERMISSIONS
6077020a 97//=========================================================================
98// The following parameter sets the permissions of new directories
eb2042f6 99// created by Moodle within the data directory. The format is in
6077020a 100// octal format (as used by the Unix utility chmod, for example).
eb2042f6 101// The default is usually OK, but you may want to change it to 0750
6077020a 102// if you are concerned about world-access to the files (you will need
103// to make sure the web server process (eg Apache) can access the files.
104// NOTE: the prefixed 0 is important, and don't use quotes.
105
d99bab2d 106$CFG->directorypermissions = 02777;
6077020a 107
108
109//=========================================================================
ec2d8ceb 110// 5. DIRECTORY LOCATION (most people can just ignore this setting)
6077020a 111//=========================================================================
eb2042f6 112// A very few webhosts use /admin as a special URL for you to access a
113// control panel or something. Unfortunately this conflicts with the
a36d42a5
PS
114// standard location for the Moodle admin pages. You can work around this
115// by renaming the admin directory in your installation, and putting that
116// new name here. eg "moodleadmin". This should fix all admin links in Moodle.
117// After any change you need to visit your new admin directory
118// and purge all caches.
6077020a 119
120$CFG->admin = 'admin';
121
122
123//=========================================================================
ec2d8ceb 124// 6. OTHER MISCELLANEOUS SETTINGS (ignore these for new installations)
21d1d077 125//=========================================================================
126//
c9ca1fa5 127// These are additional tweaks for which no GUI exists in Moodle yet.
128//
9c733e86 129// Starting in PHP 5.3 administrators should specify default timezone
130// in PHP.ini, you can also specify it here if needed.
131// See details at: http://php.net/manual/en/function.date-default-timezone-set.php
132// List of time zones at: http://php.net/manual/en/timezones.php
133// date_default_timezone_set('Australia/Perth');
c9ca1fa5 134//
1ed96821 135// Change the key pair lifetime for Moodle Networking
136// The default is 28 days. You would only want to change this if the key
137// was not getting regenerated for any reason. You would probably want
138// make it much longer. Note that you'll need to delete and manually update
139// any existing key.
140// $CFG->mnetkeylifetime = 28;
141//
77218e4a 142// Not recommended: Set the following to true to allow the use
143// off non-Moodle standard characters in usernames.
144// $CFG->extendedusernamechars = true;
145//
29ba20ac
MD
146// Allow user passwords to be included in backup files. Very dangerous
147// setting as far as it publishes password hashes that can be unencrypted
148// if the backup file is publicy available. Use it only if you can guarantee
149// that all your backup files remain only privacy available and are never
150// shared out from your site/institution!
151// $CFG->includeuserpasswordsinbackup = true;
152//
b0ccfc5c
HF
153// Completely disable user creation when restoring a course, bypassing any
154// permissions granted via roles and capabilities. Enabling this setting
155// results in the restore process stopping when a user attempts to restore a
156// course requiring users to be created.
5e934890
EL
157// $CFG->disableusercreationonrestore = true;
158//
2de3539b
EL
159// Keep the temporary directories used by backup and restore without being
160// deleted at the end of the process. Use it if you want to debug / view
161// all the information stored there after the process has ended. Note that
162// those directories may be deleted (after some ttl) both by cron and / or
163// by new backup / restore invocations.
164// $CFG->keeptempdirectoriesonbackup = true;
165//
5e934890 166// Modify the restore process in order to force the "user checks" to assume
b0ccfc5c
HF
167// that the backup originated from a different site, so detection of matching
168// users is performed with different (more "relaxed") rules. Note that this is
169// only useful if the backup file has been created using Moodle < 1.9.4 and the
170// site has been rebuilt from scratch using backup files (not the best way btw).
171// If you obtain user conflicts on restore, rather than enabling this setting
172// permanently, try restoring the backup on a different site, back it up again
173// and then restore on the target server.
5e934890
EL
174// $CFG->forcedifferentsitecheckingusersonrestore = true;
175//
c803fa68
EM
176// Force the backup system to continue to create backups in the legacy zip
177// format instead of the new tgz format. Does not affect restore, which
178// auto-detects the underlying file format.
179// $CFG->usezipbackups = true;
180//
72df7e1e 181// Prevent stats processing and hide the GUI
182// $CFG->disablestatsprocessing = true;
183//
7758d00f 184// Setting this to true will enable admins to edit any post at any time
185// $CFG->admineditalways = true;
cec0a0fc 186//
5fd1a5d8 187// These variables define DEFAULT block variables for new courses
188// If this one is set it overrides all others and is the only one used.
9574c2ef 189// $CFG->defaultblocks_override = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
3eecaaf4 190//
191// These variables define the specific settings for defined course formats.
5fd1a5d8 192// They override any settings defined in the formats own config file.
9574c2ef
PS
193// $CFG->defaultblocks_site = 'site_main_menu,course_list:course_summary,calendar_month';
194// $CFG->defaultblocks_social = 'participants,search_forums,calendar_month,calendar_upcoming,social_activities,recent_activity,course_list';
195// $CFG->defaultblocks_topics = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
196// $CFG->defaultblocks_weeks = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
3eecaaf4 197//
5fd1a5d8 198// These blocks are used when no other default setting is found.
9574c2ef 199// $CFG->defaultblocks = 'participants,activity_modules,search_forums,course_list:news_items,calendar_upcoming,recent_activity';
3eecaaf4 200//
86b5ea0f 201// You can specify a different class to be created for the $PAGE global, and to
202// compute which blocks appear on each page. However, I cannot think of any good
203// reason why you would need to change that. It just felt wrong to hard-code the
3edc37cb 204// the class name. You are strongly advised not to use these to settings unless
86b5ea0f 205// you are absolutely sure you know what you are doing.
206// $CFG->moodlepageclass = 'moodle_page';
3edc37cb 207// $CFG->moodlepageclassfile = "$CFG->dirroot/local/myplugin/mypageclass.php";
86b5ea0f 208// $CFG->blockmanagerclass = 'block_manager';
3edc37cb 209// $CFG->blockmanagerclassfile = "$CFG->dirroot/local/myplugin/myblockamanagerclass.php";
c81c6d0e 210//
6b29ba60 211// Seconds for files to remain in caches. Decrease this if you are worried
212// about students being served outdated versions of uploaded files.
0c431257 213// $CFG->filelifetime = 60*60*6;
88fea1ca 214//
d5dd0540
PS
215// Some web servers can offload the file serving from PHP process,
216// comment out one the following options to enable it in Moodle:
217// $CFG->xsendfile = 'X-Sendfile'; // Apache {@see https://tn123.org/mod_xsendfile/}
218// $CFG->xsendfile = 'X-LIGHTTPD-send-file'; // Lighttpd {@see http://redmine.lighttpd.net/projects/lighttpd/wiki/X-LIGHTTPD-send-file}
219// $CFG->xsendfile = 'X-Accel-Redirect'; // Nginx {@see http://wiki.nginx.org/XSendfile}
f7d26a05
PS
220// If your X-Sendfile implementation (usually Nginx) uses directory aliases specify them
221// in the following array setting:
222// $CFG->xsendfilealiases = array(
223// '/dataroot/' => $CFG->dataroot,
224// '/cachedir/' => '/var/www/moodle/cache', // for custom $CFG->cachedir locations
85b38061 225// '/localcachedir/' => '/var/local/cache', // for custom $CFG->localcachedir locations
f7d26a05
PS
226// '/tempdir/' => '/var/www/moodle/temp', // for custom $CFG->tempdir locations
227// '/filedir' => '/var/www/moodle/filedir', // for custom $CFG->filedir locations
228// );
229//
7953149e
PS
230// YUI caching may be sometimes improved by slasharguments:
231// $CFG->yuislasharguments = 1;
232// Some servers may need a special rewrite rule to work around internal path length limitations:
233// RewriteRule (^.*/theme/yui_combo\.php)(/.*) $1?file=$2
f7d26a05 234//
d5dd0540 235//
d79d5ac2
PS
236// Following settings may be used to select session driver, uncomment only one of the handlers.
237// Database session handler (not compatible with MyISAM):
238// $CFG->session_handler_class = '\core\session\database';
239// $CFG->session_database_acquire_lock_timeout = 120;
240//
241// File session handler (file system locking required):
242// $CFG->session_handler_class = '\core\session\file';
243// $CFG->session_file_save_path = $CFG->dataroot.'/sessions';
244//
245// Memcached session handler (requires memcached server and extension):
246// $CFG->session_handler_class = '\core\session\memcached';
247// $CFG->session_memcached_save_path = '127.0.0.1:11211';
248// $CFG->session_memcached_prefix = 'memc.sess.key.';
6ec361c6 249// $CFG->session_memcached_acquire_lock_timeout = 120;
774c00c7 250// $CFG->session_memcached_lock_expire = 7200; // Ignored if PECL memcached is below version 2.2.0
d79d5ac2 251//
e645b4d5 252// Memcache session handler (requires memcached server and memcache extension):
253// $CFG->session_handler_class = '\core\session\memcache';
254// $CFG->session_memcache_save_path = '127.0.0.1:11211';
255// $CFG->session_memcache_acquire_lock_timeout = 120;
256// ** NOTE: Memcache extension has less features than memcached and may be
257// less reliable. Use memcached where possible or if you encounter
258// session problems. **
259//
2c0eb5e6
SH
260// Please be aware that when selecting either Memcached or Memcache for sessions that it is advised to use a dedicated
261// memcache server. The memcache and memcached extensions do not provide isolated environments for individual uses.
262// Using the same server for other purposes (MUC for example) can lead to sessions being prematurely removed should
263// the other uses of the server purge the cache.
264//
d79d5ac2
PS
265// Following setting allows you to alter how frequently is timemodified updated in sessions table.
266// $CFG->session_update_timemodified_frequency = 20; // In seconds.
46a86dbb 267//
c57e9015 268// If this setting is set to true, then Moodle will track the IP of the
269// current user to make sure it hasn't changed during a session. This
270// will prevent the possibility of sessions being hijacked via XSS, but it
366dfa60 271// may break things for users coming using proxies that change all the time,
272// like AOL.
273// $CFG->tracksessionip = true;
bb64b51a 274//
bb64b51a 275// The following lines are for handling email bounces.
5fd1a5d8 276// $CFG->handlebounces = true;
277// $CFG->minbounces = 10;
278// $CFG->bounceratio = .20;
bb64b51a 279// The next lines are needed both for bounce handling and any other email to module processing.
280// mailprefix must be EXACTLY four characters.
c57e9015 281// Uncomment and customise this block for Postfix
5fd1a5d8 282// $CFG->mailprefix = 'mdl+'; // + is the separator for Exim and Postfix.
c57e9015 283// $CFG->mailprefix = 'mdl-'; // - is the separator for qmail
5fd1a5d8 284// $CFG->maildomain = 'youremaildomain.com';
f93426cf 285//
f11f8ba2
PS
286// Enable when setting up advanced reverse proxy load balancing configurations,
287// it may be also necessary to enable this when using port forwarding.
11e7b506 288// $CFG->reverseproxy = true;
289//
290// Enable when using external SSL appliance for performance reasons.
750688c7 291// Please note that site may be accessible via http: or https:, but not both!
11e7b506 292// $CFG->sslproxy = true;
293//
c57e9015 294// This setting will cause the userdate() function not to fix %d in
1ac7ee24 295// date strings, and just let them show with a zero prefix.
296// $CFG->nofixday = true;
ce5e431b 297//
298// This setting will make some graphs (eg user logs) use lines instead of bars
299// $CFG->preferlinegraphs = true;
9d5ef892 300//
18259d4f 301// Enabling this will allow custom scripts to replace existing moodle scripts.
9677eb79 302// For example: if $CFG->customscripts/course/view.php exists then
18259d4f 303// it will be used instead of $CFG->wwwroot/course/view.php
304// At present this will only work for files that include config.php and are called
305// as part of the url (index.php is implied).
306// Some examples are:
307// http://my.moodle.site/course/view.php
308// http://my.moodle.site/index.php
309// http://my.moodle.site/admin (index.php implied)
310// Custom scripts should not include config.php
311// Warning: Replacing standard moodle scripts may pose security risks and/or may not
312// be compatible with upgrades. Use this option only if you are aware of the risks
c57e9015 313// involved.
9677eb79 314// Specify the full directory path to the custom scripts
315// $CFG->customscripts = '/home/example/customscripts';
18259d4f 316//
c57e9015 317// Performance profiling
318//
853df85e 319// If you set Debug to "Yes" in the Configuration->Variables page some
320// performance profiling data will show up on your footer (in default theme).
321// With these settings you get more granular control over the capture
322// and printout of the data
323//
324// Capture performance profiling data
325// define('MDL_PERF' , true);
326//
327// Capture additional data from DB
328// define('MDL_PERFDB' , true);
329//
330// Print to log (for passive profiling of production servers)
331// define('MDL_PERFTOLOG' , true);
332//
333// Print to footer (works with the default theme)
334// define('MDL_PERFTOFOOT', true);
335//
c646dd26
EL
336// Enable earlier profiling that causes more code to be covered
337// on every request (db connections, config load, other inits...).
338// Requires extra configuration to be defined in config.php like:
339// profilingincluded, profilingexcluded, profilingautofrec,
340// profilingallowme, profilingallowall, profilinglifetime
341// $CFG->earlyprofilingenabled = true;
342//
4c202228 343// Force displayed usernames
c57e9015 344// A little hack to anonymise user names for all students. If you set these
4c202228 345// then all non-teachers will always see these for every person.
346// $CFG->forcefirstname = 'Bruce';
347// $CFG->forcelastname = 'Simpson';
acd2279e 348//
5c5c16bb 349// The following setting will turn on username logging into Apache log. For full details regarding setting
350// up of this function please refer to the install section of the document.
351// $CFG->apacheloguser = 0; // Turn this feature off. Default value.
352// $CFG->apacheloguser = 1; // Log user id.
353// $CFG->apacheloguser = 2; // Log full name in cleaned format. ie, Darth Vader will be displayed as darth_vader.
c57e9015 354// $CFG->apacheloguser = 3; // Log username.
bd10cc11 355// To get the values logged in Apache's log, add to your httpd.conf
356// the following statements. In the General part put:
220776ac 357// LogFormat "%h %l %{MOODLEUSER}n %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" moodleformat
bd10cc11 358// And in the part specific to your Moodle install / virtualhost:
359// CustomLog "/your/path/to/log" moodleformat
360// CAUTION: Use of this option will expose usernames in the Apache log,
361// If you are going to publish your log, or the output of your web stats analyzer
362// this will weaken the security of your website.
c57e9015 363//
364// Email database connection errors to someone. If Moodle cannot connect to the
880a6f6b 365// database, then email this address with a notice.
366//
6b25f553 367// $CFG->emailconnectionerrorsto = 'your@emailaddress.com';
c57e9015 368//
6f93e96c 369// Set the priority of themes from highest to lowest. This is useful (for
370// example) in sites where the user theme should override all other theme
371// settings for accessibility reasons. You can also disable types of themes
b7009474 372// (other than site) by removing them from the array. The default setting is:
373// $CFG->themeorder = array('course', 'category', 'session', 'user', 'site');
6f93e96c 374// NOTE: course, category, session, user themes still require the
375// respective settings to be enabled
376//
73e504bc
PS
377// It is possible to add extra themes directory stored outside of $CFG->dirroot.
378// This local directory does not have to be accessible from internet.
379//
380// $CFG->themedir = '/location/of/extra/themes';
381//
2752739c
PS
382// It is possible to specify different cache and temp directories, use local fast filesystem
383// for normal web servers. Server clusters MUST use shared filesystem for cachedir!
85b38061 384// Localcachedir is intended for server clusters, it does not have to be shared by cluster nodes.
32db0f0d
PS
385// The directories must not be accessible via web.
386//
70be2642 387// $CFG->tempdir = '/var/www/moodle/temp'; // Directory MUST BE SHARED by all clsuter nodes.
85b38061
PS
388// $CFG->cachedir = '/var/www/moodle/cache'; // Directory MUST BE SHARED by all cluster nodes, locking required.
389// $CFG->localcachedir = '/var/local/cache'; // Intended for local node caching.
32db0f0d 390//
f0bf9ffe
PS
391// Some filesystems such as NFS may not support file locking operations.
392// Locking resolves race conditions and is strongly recommended for production servers.
393// $CFG->preventfilelocking = false;
394//
56fb6963
DM
395// Site default language can be set via standard administration interface. If you
396// want to have initial error messages for eventual database connection problems
397// localized too, you have to set your language code here.
398//
399// $CFG->lang = 'yourlangcode'; // for example 'cs'
400//
49084fe1
SH
401// When Moodle is about to perform an intensive operation it raises PHP's memory
402// limit. The following setting should be used on large sites to set the raised
403// memory limit to something higher.
404// The value for the settings should be a valid PHP memory value. e.g. 512M, 1G
e99033b0 405//
0a08cb40 406// $CFG->extramemorylimit = '1024M';
e99033b0 407//
bb250f02
SH
408// Moodle 2.4 introduced a new cache API.
409// The cache API stores a configuration file within the Moodle data directory and
410// uses that rather than the database in order to function in a stand-alone manner.
411// Using altcacheconfigpath you can change the location where this config file is
412// looked for.
413// It can either be a directory in which to store the file, or the full path to the
414// file if you want to take full control. Either way it must be writable by the
415// webserver.
416//
417// $CFG->altcacheconfigpath = '/var/www/shared/moodle.cache.config.php
418//
1d1d807e
SH
419// The CSS files the Moodle produces can be extremely large and complex, especially
420// if you are using a custom theme that builds upon several other themes.
ff8e5d47 421// In Moodle 2.3 a CSS optimiser was added as an experimental feature for advanced
1d1d807e
SH
422// users. The CSS optimiser organises the CSS in order to reduce the overall number
423// of rules and styles being sent to the client. It does this by collating the
424// CSS before it is cached removing excess styles and rules and stripping out any
425// extraneous content such as comments and empty rules.
426// The following settings are used to enable and control the optimisation.
427//
428// Enable the CSS optimiser. This will only optimise the CSS if themedesignermode
6bbd4858
SH
429// is not enabled. This can be set through the UI however it is noted here as well
430// because the other CSS optimiser settings can not be set through the UI.
1d1d807e 431//
6bbd4858 432// $CFG->enablecssoptimiser = true;
1d1d807e
SH
433//
434// If set the CSS optimiser will add stats about the optimisation to the top of
435// the optimised CSS file. You can then inspect the CSS to see the affect the CSS
436// optimiser is having.
437//
6bbd4858 438// $CFG->cssoptimiserstats = true;
1d1d807e 439//
6bbd4858 440// If set the CSS that is optimised will still retain a minimalistic formatting
1d1d807e
SH
441// so that anyone wanting to can still clearly read it.
442//
6bbd4858 443// $CFG->cssoptimiserpretty = true;
1d1d807e 444//
5aab24ef
DM
445// Use the following flag to completely disable the Available update notifications
446// feature and hide it from the server administration UI.
447//
448// $CFG->disableupdatenotifications = true;
449//
c2c4f722
DM
450// Use the following flag to completely disable the Automatic updates deployment
451// feature and hide it from the server administration UI.
452//
453// $CFG->disableupdateautodeploy = true;
454//
455// Use the following flag to completely disable the On-click add-on installation
456// feature and hide it from the server administration UI.
457//
458// $CFG->disableonclickaddoninstall = true;
459//
f12f3416
AN
460// Use the following flag to disable modifications to scheduled tasks
461// whilst still showing the state of tasks.
462//
463// $CFG->preventscheduledtaskchanges = true;
464//
436dbeec
SH
465// As of version 2.4 Moodle serves icons as SVG images if the users browser appears
466// to support SVG.
467// For those wanting to control the serving of SVG images the following setting can
468// be defined in your config.php.
469// If it is not defined then the default (browser detection) will occur.
470//
471// To ensure they are always used when available:
472// $CFG->svgicons = true;
473//
474// To ensure they are never used even when available:
475// $CFG->svgicons = false;
476//
9a2b5e0b
HD
477// Some administration options allow setting the path to executable files. This can
478// potentially cause a security risk. Set this option to true to disable editing
479// those config settings via the web. They will need to be set explicitly in the
480// config.php file
481// $CFG->preventexecpath = true;
482//
3bcf6b3c
RT
483// Use the following flag to set userid for noreply user. If not set then moodle will
484// create dummy user and use -ve value as user id.
485// $CFG->noreplyuserid = -10;
486//
487// As of version 2.6 Moodle supports admin to set support user. If not set, all mails
488// will be sent to supportemail.
489// $CFG->supportuserid = -20;
490//
9843e5ec
DW
491// Moodle 2.7 introduces a locking api for critical tasks (e.g. cron).
492// The default locking system to use is DB locking for MySQL and Postgres, and File
493// locking for Oracle and SQLServer. If $CFG->preventfilelocking is set, then the default
494// will always be DB locking. It can be manually set to one of the lock
495// factory classes listed below, or one of your own custom classes implementing the
496// \core\lock\lock_factory interface.
497//
498// $CFG->lock_factory = "auto";
499//
500// The list of available lock factories is:
501//
502// "\\core\\lock\\file_lock_factory" - File locking
503// Uses lock files stored by default in the dataroot. Whether this
504// works on clusters depends on the file system used for the dataroot.
505//
308e481c 506// "\\core\\lock\\db_record_lock_factory" - DB locking based on table rows.
9843e5ec
DW
507//
508// "\\core\\lock\\postgres_lock_factory" - DB locking based on postgres advisory locks.
509//
9843e5ec
DW
510// Settings used by the lock factories
511//
512// Location for lock files used by the File locking factory. This must exist
513// on a shared file system that supports locking.
514// $CFG->lock_file_root = $CFG->dataroot . '/lock';
515//
91fed57a 516// Moodle 2.9 allows administrators to customise the list of supported file types.
517// To add a new filetype or override the definition of an existing one, set the
518// customfiletypes variable like this:
519//
520// $CFG->customfiletypes = array(
521// (object)array(
522// 'extension' => 'frog',
523// 'icon' => 'archive',
524// 'type' => 'application/frog',
525// 'customdescription' => 'Amphibian-related file archive'
526// )
527// );
528//
529// The extension, icon, and type fields are required. The icon field can refer to
530// any icon inside the pix/f folder. You can also set the customdescription field
531// (shown above) and (for advanced use) the groups, string, and defaulticon fields.
532//
84ebf08d 533//=========================================================================
ec2d8ceb 534// 7. SETTINGS FOR DEVELOPMENT SERVERS - not intended for production use!!!
84ebf08d 535//=========================================================================
f4fa5a63 536//
91ee8a67 537// Force a debugging mode regardless the settings in the site administration
d9d61fa3
PS
538// @error_reporting(E_ALL | E_STRICT); // NOT FOR PRODUCTION SERVERS!
539// @ini_set('display_errors', '1'); // NOT FOR PRODUCTION SERVERS!
540// $CFG->debug = (E_ALL | E_STRICT); // === DEBUG_DEVELOPER - NOT FOR PRODUCTION SERVERS!
541// $CFG->debugdisplay = 1; // NOT FOR PRODUCTION SERVERS!
91ee8a67 542//
0ed26d12
PS
543// You can specify a comma separated list of user ids that that always see
544// debug messages, this overrides the debug flag in $CFG->debug and $CFG->debugdisplay
545// for these users only.
546// $CFG->debugusers = '2';
547//
91ee8a67 548// Prevent theme caching
770a25c6 549// $CFG->themedesignermode = true; // NOT FOR PRODUCTION SERVERS!
91ee8a67 550//
a45e8fd3 551// Prevent JS caching
770a25c6 552// $CFG->cachejs = false; // NOT FOR PRODUCTION SERVERS!
a45e8fd3 553//
fa64202a
AN
554// Restrict which YUI logging statements are shown in the browser console.
555// For details see the upstream documentation:
556// http://yuilibrary.com/yui/docs/api/classes/config.html#property_logInclude
557// http://yuilibrary.com/yui/docs/api/classes/config.html#property_logExclude
558// $CFG->yuiloginclude = array(
559// 'moodle-core-dock-loader' => true,
560// 'moodle-course-categoryexpander' => true,
561// );
562// $CFG->yuilogexclude = array(
563// 'moodle-core-dock' => true,
564// 'moodle-core-notification' => true,
565// );
566//
567// Set the minimum log level for YUI logging statements.
568// For details see the upstream documentation:
569// http://yuilibrary.com/yui/docs/api/classes/config.html#property_logLevel
570// $CFG->yuiloglevel = 'debug';
571//
598a82c9 572// Prevent core_string_manager application caching
e799e819 573// $CFG->langstringcache = false; // NOT FOR PRODUCTION SERVERS!
f53fde9f 574//
38d93cb0
PS
575// When working with production data on test servers, no emails or other messages
576// should ever be send to real users
91ee8a67 577// $CFG->noemailever = true; // NOT FOR PRODUCTION SERVERS!
49da4a5f
DM
578//
579// Divert all outgoing emails to this address to test and debug emailing features
91ee8a67 580// $CFG->divertallemailsto = 'root@localhost.local'; // NOT FOR PRODUCTION SERVERS!
1045a007 581//
76f2fcde 582// Uncomment if you want to allow empty comments when modifying install.xml files.
91ee8a67 583// $CFG->xmldbdisablecommentchecking = true; // NOT FOR PRODUCTION SERVERS!
1045a007 584//
585// Since 2.0 sql queries are not shown during upgrade by default.
586// Please note that this setting may produce very long upgrade page on large sites.
91ee8a67 587// $CFG->upgradeshowsql = true; // NOT FOR PRODUCTION SERVERS!
12bb0c3e 588//
ddd11b6c
PS
589// Add SQL queries to the output of cron, just before their execution
590// $CFG->showcronsql = true;
591//
592// Force developer level debug and add debug info to the output of cron
593// $CFG->showcrondebugging = true;
594//
12bb0c3e 595//=========================================================================
ec2d8ceb 596// 8. FORCED SETTINGS
12bb0c3e
PS
597//=========================================================================
598// It is possible to specify normal admin settings here, the point is that
599// they can not be changed through the standard admin settings pages any more.
600//
601// Core settings are specified directly via assignment to $CFG variable.
602// Example:
603// $CFG->somecoresetting = 'value';
604//
605// Plugin settings have to be put into a special array.
606// Example:
607// $CFG->forced_plugin_settings = array('pluginname' => array('settingname' => 'value', 'secondsetting' => 'othervalue'),
608// 'otherplugin' => array('mysetting' => 'myvalue', 'thesetting' => 'thevalue'));
3c88a678
DW
609// Module default settings with advanced/locked checkboxes can be set too. To do this, add
610// an extra config with '_adv' or '_locked' as a suffix and set the value to true or false.
611// Example:
612// $CFG->forced_plugin_settings = array('pluginname' => array('settingname' => 'value', 'settingname_locked' => true, 'settingname_adv' => true));
5bd40408
PS
613//
614//=========================================================================
ec2d8ceb 615// 9. PHPUNIT SUPPORT
5bd40408
PS
616//=========================================================================
617// $CFG->phpunit_prefix = 'phpu_';
618// $CFG->phpunit_dataroot = '/home/example/phpu_moodledata';
619// $CFG->phpunit_directorypermissions = 02777; // optional
a09534f4 620//
ec2d8ceb
SC
621//
622//=========================================================================
623// 10. SECRET PASSWORD SALT
624//=========================================================================
6780a1d3
625// A site-wide password salt is no longer used in new installations.
626// If upgrading from 2.6 or older, keep all existing salts in config.php file.
ec2d8ceb
SC
627//
628// $CFG->passwordsaltmain = 'a_very_long_random_string_of_characters#@6&*1';
629//
630// You may also have some alternative salts to allow migration from previously
631// used salts.
632//
633// $CFG->passwordsaltalt1 = '';
634// $CFG->passwordsaltalt2 = '';
635// $CFG->passwordsaltalt3 = '';
636// ....
637// $CFG->passwordsaltalt19 = '';
638// $CFG->passwordsaltalt20 = '';
639//
640//
a09534f4
DM
641//=========================================================================
642// 11. BEHAT SUPPORT
643//=========================================================================
60129d5d 644// Behat test site needs a unique www root, data directory and database prefix:
f8cb3e62 645//
60129d5d 646// $CFG->behat_wwwroot = 'http://127.0.0.1/moodle';
f8cb3e62
PS
647// $CFG->behat_prefix = 'bht_';
648// $CFG->behat_dataroot = '/home/example/bht_moodledata';
649//
d6abac76
DM
650// You can override default Moodle configuration for Behat and add your own
651// params; here you can add more profiles, use different Mink drivers than Selenium...
096858ed
DM
652// These params would be merged with the default Moodle behat.yml, giving priority
653// to the ones specified here. The array format is YAML, following the Behat
d6abac76
DM
654// params hierarchy. More info: http://docs.behat.org/guides/7.config.html
655// Example:
bd770617 656// $CFG->behat_config = array(
d6abac76
DM
657// 'default' => array(
658// 'formatter' => array(
659// 'name' => 'pretty',
660// 'parameters' => array(
661// 'decorated' => true,
662// 'verbose' => false
663// )
664// )
ae689a96
DM
665// ),
666// 'Mac-Firefox' => array(
667// 'extensions' => array(
668// 'Behat\MinkExtension\Extension' => array(
669// 'selenium2' => array(
670// 'browser' => 'firefox',
671// 'capabilities' => array(
672// 'platform' => 'OS X 10.6',
673// 'version' => 20
674// )
675// )
676// )
677// )
678// ),
679// 'Mac-Safari' => array(
680// 'extensions' => array(
681// 'Behat\MinkExtension\Extension' => array(
682// 'selenium2' => array(
683// 'browser' => 'safari',
684// 'capabilities' => array(
685// 'platform' => 'OS X 10.8',
686// 'version' => 6
687// )
688// )
689// )
690// )
d6abac76
DM
691// )
692// );
693//
886b44bb
DM
694// You can force the browser session (not user's sessions) to restart after N seconds. This could
695// be useful if you are using a cloud-based service with time restrictions in the browser side.
696// Setting this value the browser session that Behat is using will be restarted. Set the time in
697// seconds. Is not recommended to use this setting if you don't explicitly need it.
698// Example:
699// $CFG->behat_restart_browser_after = 7200; // Restarts the browser session after 2 hours
700//
401f60d5
DM
701// All this page's extra Moodle settings are compared against a white list of allowed settings
702// (the basic and behat_* ones) to avoid problems with production environments. This setting can be
703// used to expand the default white list with an array of extra settings.
704// Example:
d0c2bc64 705// $CFG->behat_extraallowedsettings = array('somecoresetting', ...);
1325d493 706//
c3a40dea
DM
707// You should explicitly allow the usage of the deprecated behat steps, otherwise an exception will
708// be thrown when using them. The setting is disabled by default.
709// Example:
710// $CFG->behat_usedeprecated = true;
711//
ddb0a1b0
AB
712// Including feature files from directories outside the dirroot is possible if required. The setting
713// requires that the running user has executable permissions on all parent directories in the paths.
714// Example:
715// $CFG->behat_additionalfeatures = array('/home/developer/code/wipfeatures');
716//
a964ead0
AN
717// You can make behat save several dumps when a scenario fails. The dumps currently saved are:
718// * a dump of the DOM in it's state at the time of failure; and
719// * a screenshot (JavaScript is required for the screenshot functionality, so not all browsers support this option)
5c0dfe32 720// Example:
a964ead0 721// $CFG->behat_faildump_path = '/my/path/to/save/failure/dumps';
5c0dfe32 722//
3c71c15c
RT
723// You can specify db, selenium wd_host etc. for behat parallel run by setting following variable.
724// Example:
725// $CFG->behat_parallel_run = array (
726// array (
727// 'dbtype' => 'mysqli',
728// 'dblibrary' => 'native',
729// 'dbhost' => 'localhost',
730// 'dbname' => 'moodletest',
731// 'dbuser' => 'moodle',
732// 'dbpass' => 'moodle',
733// 'behat_prefix' => 'mdl_',
5b9e6b55
RT
734// 'wd_host' => 'http://127.0.0.1:4444/wd/hub',
735// 'behat_wwwroot' => 'http://127.0.0.1/moodle',
736// 'behat_dataroot' => '/home/example/bht_moodledata'
3c71c15c
RT
737// ),
738// );
739//
52acb7c9
RT
740// To change name of behat parallel run site, define BEHAT_PARALLEL_SITE_NAME and parallel run sites will be suffixed
741// with this value
742// Example:
743// define('BEHAT_PARALLEL_SITE_NAME', 'behatparallelsite');
744//
745// Command line output for parallel behat install is limited to 80 chars, if you are installing more then 4 sites and
746// want to expand output to more then 80 chars, then define BEHAT_MAX_CMD_LINE_OUTPUT
747// Example:
748// define('BEHAT_MAX_CMD_LINE_OUTPUT', 120);
749//
750// Behat feature files will be distributed randomly between the processes by default. If you have timing file or want
751// to create timing file then define BEHAT_FEATURE_TIMING_FILE with path to timing file. It will be updated for each
752// run with latest time taken to execute feature.
753// Example:
754// define('BEHAT_FEATURE_TIMING_FILE', '/PATH_TO_TIMING_FILE/timing.json');
755//
756// If you don't have timing file and want some stable distribution of features, then you can use step counts to
757// distribute the features. You can generate step file by executing php admin/tool/behat/cli/util.php --updatesteps
758// this will update step file which is defined by BEHAT_FEATURE_STEP_FILE.
759// Example:
760// define('BEHAT_FEATURE_STEP_FILE', '/PATH_TO_FEATURE_STEP_COUNT_FILE/stepcount.json');
761//
762// Feature distribution for each process is displayed as histogram. you can disable it by setting
763// BEHAT_DISABLE_HISTOGRAM
764// Example:
765// define('BEHAT_DISABLE_HISTOGRAM', true);
766//
1325d493
DM
767//=========================================================================
768// 12. DEVELOPER DATA GENERATOR
769//=========================================================================
770//
771// The developer data generator tool is intended to be used only in development or testing sites and
772// it's usage in production environments is not recommended; if it is used to create JMeter test plans
773// is even less recommended as JMeter needs to log in as site course users. JMeter needs to know the
774// users passwords but would be dangerous to have a default password as everybody would know it, which would
775// be specially dangerouse if somebody uses this tool in a production site, so in order to prevent unintended
776// uses of the tool and undesired accesses as well, is compulsory to set a password for the users
777// generated by this tool, but only in case you want to generate a JMeter test. The value should be a string.
778// Example:
779// $CFG->tool_generator_users_password = 'examplepassword';
1bce3a70
RT
780//
781//=========================================================================
782// 13. SYSTEM PATHS (You need to set following, depending on your system)
783//=========================================================================
784// Ghostscript path.
785// On most Linux installs, this can be left as '/usr/bin/gs'.
786// On Windows it will be something like 'c:\gs\bin\gswin32c.exe' (make sure
787// there are no spaces in the path - if necessary copy the files 'gswin32c.exe'
788// and 'gsdll32.dll' to a new folder without a space in the path)
789// $CFG->pathtogs = '/usr/bin/gs';
790//
791// Clam AV path.
792// Probably something like /usr/bin/clamscan or /usr/bin/clamdscan. You need
793// this in order for clam AV to run.
794// $CFG->pathtoclam = '';
795//
796// Path to du.
797// Probably something like /usr/bin/du. If you enter this, pages that display
798// directory contents will run much faster for directories with a lot of files.
799// $CFG->pathtodu = '';
800//
801// Path to aspell.
802// To use spell-checking within the editor, you MUST have aspell 0.50 or later
803// installed on your server, and you must specify the correct path to access the
804// aspell binary. On Unix/Linux systems, this path is usually /usr/bin/aspell,
805// but it might be something else.
806// $CFG->aspellpath = '';
807//
808// Path to dot.
809// Probably something like /usr/bin/dot. To be able to generate graphics from
810// DOT files, you must have installed the dot executable and point to it here.
811// Note that, for now, this only used by the profiling features
812// (Development->Profiling) built into Moodle.
813// $CFG->pathtodot = '';
84ebf08d 814
6077020a 815//=========================================================================
816// ALL DONE! To continue installation, visit your main page with a browser
817//=========================================================================
c781942f 818
d440bcfa 819require_once(dirname(__FILE__) . '/lib/setup.php'); // Do not edit
3b5ff37f 820
fa4556c5 821// There is no php closing tag in this file,
822// it is intentional because it prevents trailing whitespace problems!